Unistrut Channel Strut

Unistrut slotted channel, also known as Strut, is available as 41x41mm deep channel or 41x21mm shallow channel in either 3 or 6 metre lengths, with 11mm or 14mm wide slots depending on the profile. It's manufactured from 2.5mm thick pre galvanised steel, suitable for indoor applications. As with all channel lengths Unistrut slotted channel can be used with channel accessories to build frames for the support or suspension of electrical and mechanical services. The slots allow studding (screwed rod) to pass through enabling the creation of trapezes that can be used to support cable/basket tray, or pipework.

Unistrut hot dipped galvansied channel is galvanised after manufacture to provide a robust coating for outdoor installations, use with standard channel brackets (all hot dipped galvanised) and HDG spring nuts. As with the Unistrut slotted pre galvanised channel, it is available in 3 or 6 metre lengths with profiles of 41x41mm or 41x21mm, all manufactured from 2.5mm steel, with 11 or 14mm wide slots.

A range of Unistrut Channel in 41x41mm or 41x21mm profiles pre cut to set lengths, this not only saves considerable time and effort but also cuts down on the amount of waste, as you only need to order the lengths you need. If there is a size you require that's not listed or is showing out of stock, then please contact our Customer Service Team for a quote and delivery date, it will still be with you in a day or two.

Unistrut offer a plain channel version of channel without the slots it is available in the same 41x41mm and 41x21mm profiles and 3 and 6 metre lengths. Like the pre galvanised slotted channel, it's available in a back to back configuration. Manufactured from pre galvanised steel this channel is suitable for indoor applications.

This Unistrut plain channel has been hot dipped galvanised after manufacture to provide the enhanced protection needed for outdoor applications.