Zinc plated steel saddle clamps to hold down steel pipe work with nominal bore sizes 15-300mm. Download the Saddle Clamp
Nylon coated saddle clamps to hold down copper pipe Ø 15-160mm. Download the Saddle Clamp
Zinc plated U Bolts for supporting pipe work. Sizing based on the nominal bore size of the pipe although the internal diameter and length of the U bolts legs are also indicated.
Ball swivel hangers allow for the thermal expansion and contraction of pipes by providing a pivot point between the pipe clamp and the fixture. The zinc plated swivel hangers are available with either M8 or M10 threads with standard or extended length bodies. An inspection hole allows the screw in depth to be checked to prevent the blocking of the ball swivel. Two ball swivel hangers are required for each drop, see the ball swivel hanger
technical sheet. For hanging directly from channel see Rapid Rail ball swivel rod hangers, which have a built in slide nut.
The expansion joint allows for 35mm of linear expansion/contraction of pipework due to changes in temperature. The bolt and nut are CO2 welded for a durable joint. Download the expansion joint
A range of devices, guides and slides for guiding linear expansion or contraction.
A roller chair and guide supports steel pipework from 65mm to 200mm NB It supports the pipework where horizontal movement due to expansiona and contraction of the pipes occurs. Download the roller chair and guide
technical sheet that contains all the relevant dimensions.
A wall of ceiling fixing that provides the metric threaded stud. Install into a hole prepared just like for a woodscrew, simply drill and insert a plastic plug and screw the Hanger bolt using a T25 Torx bit. There's a hexagon half way down the fixing to allow fine setting.
Used for hanging split band pipe clips, the bolt connecting the two halves of the pipe band is passed through the link eye. This provides a fitting for connecting the pipe band to a drop of threaded rod. Download a link eye
Thread adaptors increase or reduce the thread of a pipe clamp. Download a technical sheet on thread adaptors
showing their dimensions.
A Jubilee® hose clip Clip is designed to hold a soft, pliable hose or a rigid circular pipe of a smaller diameter. Rotating the screw has the effect of changing the diameter of the circle formed by the band. The Clip can be tightened with a regular slotted screwdriver or the Jubilee Flexidriver®. The band and fastener are made from mild steel.
Compression ended inline brass ball valves, chrome plated.